Ten years ago, a rooftop array in Sonoma County worked a lot like a savings account. Every extra kilowatt hour sent to the grid at noon came back at full retail value after dark. A battery was a luxury bought mostly by people who worried about blackouts. That deal no longer exists for new systems, and the change has reshaped what a smart solar purchase looks like.
Homeowners from Windsor down to Novato who call EFI Electric about panels usually end up talking just as much about batteries, breaker boxes and backup power. Those parts of the job now carry most of the financial weight. The family-run contractor is led by Scott Connors and holds a California license. It installs rooftop solar alongside Tesla, FranklinWH and Enphase storage, along with the panel upgrades and generators that often have to come with them.
The Rules Changed Underneath the Panels
California’s Net Billing Tariff took effect on April 15, 2023 for new customers of PG&E, Southern California Edison and SDG&E. Most people still call it NEM 3. Under the older program, exported power earned roughly the same rate you paid to buy power. Under the new one, exports are credited at the utility’s “avoided cost,” which usually works out to a few cents per kilowatt hour for most of the year. The California Public Utilities Commission explains how the tariff was built and why on its Net Billing Tariff page.
For a while, solar advocates hoped the courts would undo it. That hope is gone. A state appeals court upheld the tariff in March 2026, and the California Supreme Court declined to review it in June. Homeowners who connected under the older rules keep their terms for 20 years from their interconnection date. Everyone installing now plans around net billing.
The federal side shifted too. The 30 percent Residential Clean Energy Credit ended for homeowner-owned systems placed in service after December 31, 2025. Leased systems and power purchase agreements still benefit through a separate commercial credit for now. People paying cash or financing on their own no longer get that federal discount. So each dollar spent has to earn its keep through the electric bill.
Following One Summer Day Across the Meter
The easiest way to see why storage matters is to follow a house in Santa Rosa through a single July day on a time-of-use rate.
Early Morning
The panels wake up slowly. The house pulls a little power from the grid for coffee and the refrigerator, at a fairly cheap off-peak price. Nothing interesting happens yet.
Late Morning Through Midafternoon
Now the array is producing more than the house can use. Under the old rules, this surplus was the whole point. Under net billing, sending it to the grid earns very little. With a battery, that surplus goes into storage instead. Most systems can fill a battery well before the afternoon is over on a clear day.
Four to Nine in the Evening
This is the window that drives the bill. The sun is fading, the air conditioner is still working, dinner is cooking, and grid power is at its most expensive. A battery covers these hours with energy that would have been worth pennies at noon. Over a year, this one swap explains most of the savings gap between a solar-only home and a solar-plus-storage home.
Overnight
Whatever charge is left either carries the house into the early morning or stays in reserve. Many owners keep a set percentage, often 20 to 30 percent, locked away in case the power goes out.
Sizing Storage for Bills or for Blackouts
A battery bought to shift evening use and a battery bought to ride out a three-day outage are not the same purchase. Before getting quotes, it helps to have a few things ready.
- Twelve months of hourly usage data, which PG&E customers can download through the Green Button feature in their online account
- A short list of circuits that truly must stay on during an outage, such as the refrigerator, well pump, medical equipment, internet and a few lights
- Any big loads coming soon, like an electric vehicle, heat pump or induction range
- A sense of how long past outages at your address have lasted
For bill savings alone, many homes do fine with one unit in the 13 to 15 kilowatt hour range. Whole-home backup that includes central air or a well pump needs more stored energy. It also needs more instant power output, because motors pull a surge when they start. Partial backup on a dedicated subpanel keeps costs down and stretches the charge much further.
Fire Season Adds a Second Reason
Sonoma County residents remember the Tubbs and Kincade fires. Many also remember the days of planned outages that came after them, when utilities shut off lines on windy, dry days to keep equipment from starting new fires. These shutoffs can last a day or more. They hit rural homes on private wells especially hard, because no power means no water.
A battery switches over in a fraction of a second. It runs silently and needs no fuel deliveries, which makes it ideal for short and medium outages. A standby generator makes more sense when an outage might run several days in cloudy smoke, when solar output drops. Many households now combine the two. Solar refills the battery when the sky allows, and a propane or natural gas generator steps in only when the charge runs low. This setup also cuts generator run time, fuel use and noise.
The Gray Box in the Garage Gets a Vote
Plenty of older homes around Petaluma, Sebastopol and Rohnert Park still run on 100 amp service. Some have panels from makers with known breaker problems, like Federal Pacific or Zinsco. Adding solar and storage feeds power into that panel from a new direction, and the electrical code limits how much it can accept.
The common rule of thumb is the 120 percent rule. On a 200 amp panel with a 200 amp main breaker, it allows only about 40 amps of solar backfeed. Bigger arrays or multiple batteries often push past that limit. When that happens, the options include replacing the main panel, reducing the main breaker, or adding a subpanel for backed-up circuits. Newer energy management equipment can sometimes stay under the limit by electronically capping current. Each path needs a permit, and a service upgrade means coordinating with PG&E, which can add weeks to the schedule.
Reading a Quote When Exports Are Cheap
A good proposal written after these changes looks different from one written in 2019. It should show expected savings based on your own hourly usage and your actual rate plan, not a flat estimate per kilowatt hour. It should say how much of the battery is kept for backup and how much is used each day. And it should explain plainly whether your panel can take the new equipment as it is.
Payback periods are longer now that the federal credit is gone. The trade is a home that relies less on peak-hour pricing and keeps its lights, water and refrigerator running when the wind picks up and the lines go dark. In fire country, that second benefit has its own value that’s hard to put a price on.
Storage Now Decides Whether Rooftop Solar Pays